AMF Threadworks Moose Mitts -
A.K.A Pogies
If you ride in the winter & colder months but bulky gloves don't seem to keep your hands warm, or make shifting/braking nearly impossible. Moose Mitts are the answer! The Moose Mitts allow you to use regular riding gloves, and still keep your hands warm.

Standard Version Mitts: These are essentially a large mitten that covers the handlebars and bar ends of any flat bar bike (riser bars too). These stay attached to the handlebar, you simply slip your hands inside and keep them warm. Shift and brake with ease while using your normal biking gloves. These type of bike mitts have been a used by iditasport and winter riding enthusiast for years. Drop Bar Version Mitts: We have a new road bike version. After lots of testing and design updates We have a design we feel good about...and thing you will too. The Road version is more open in the back end, but allows the rider to ride in the Drops, Hoods, and Flats of any drop bar. Made of 1000 Denier Cordura and Fleece lined your fingers will be warmer longer and keep you riding during the colder months.
Killer Black Mitt
FYI the Standard Version works great
on XC Ski Poles too...
Killer Black Mitt

Flat Bar, Riser Bar, or XC Ski Pole use the
Standard Version $59.99 pr.
Killer Black Mitt

Drop Bar Version. Black with Reflective Stripe
$74.99 pr. Scroll down the page for more pictures.

Ordering Note 1/14/2010:
We have finally dug our selves out from the holiday order rush and are still in full production mode. Orders placed today should be within our normal 7-14 business day delivery time. Please keep in mind that we make these by hand at our shop, and occasionally do run into small delays. But after the holidays we are much more able to keep up with the demand. Currently were filling order in 1-2 weeks. .

Thanks
Trail's Edge Staff
Mike, Abby, Aaron, Vince.

Details:
1000 Denier Cordura
provides a strong, abrasion resistant material, which is also coated with wind/water proof membrane. Sorry Black only
Fleece Lining
Provides a warm environment for those digits. Once the internal area gets warm from your hands they stay that way.
3M Reflective Stripe
500 candle power reflective material sewn across the top provides a little added safety for riding at night

Standard Internal Pocket: (Standard Version Only)
Standard in all Flat Bar Moose Mitts, this pocket is a good place to keep your energy bars warm enough to eat. It can also be used to store chemical hand warmers for added warmth.
 Closure Velcro (Standard Version Only)
Two small Velcro pieces added to the bottom and inside top allow you to close your MTB Moose Mitts when not being used. This is especially useful when the bike is sitting outside in the rain or snow...It is a good way to help keep heat in to avoid re-heating the internal chamber.

FREE U.S. Postal SHIPPING (US Orders Only)
Candadian Orders are $15 extra for shipping
  Quantity
Moose Mitts - Standard Version $59.99/pr.
for Flat/Riser Bars or XC Ski Poles
Moose Mitts - Drop Bar Version $74.99/pr.
for Road or Cross Bikes
Additonal Canadian Shipping Fee $15 For Canadian All Orders
Internal View
Jon Heft Racing the Paul Bunyan MTB series
Standard version shown above

Testimonials:
"Moose Mitts Road Version 1.0 arrived this past Thursday or Friday. We used them Sat., 26F high, cross bikes on pavement and gravel (mostly gravel) 3.5 hours and all we wore were light Smartwool liners. GREAT JOB! Thanks for coming up with the design and production. They definitely will give us another bike choice this winter.
Marshall "

"Just wanted to drop you a note to let you know I received my order. Your moose mittens are awesome! I don't know how I got by without them.
Brandon"

"I've been using the pogies since the holidays now, and I'm loving them. Where normally my fingers would be cold after a ride, they are now toasty warm. A ride in -1C with heavy rain proved to be no problem at all. They trully are amazing!
Ben "

"Got my Moose Mitts a few months ago. Just now got a chance to thank you for the quality product. I now have found my "solution" for winter riding. I love being able to wear thinner, lighter gloves and can switch to larger gloves if necessary. The material is very windproof. I will tell everyone I can when they ask what they are and where I got them. I love buying a quality USA made product! Thanks for your excellent product and service.
Jeff "
Internal View
Vince on the way to sew more Mitts...
Standard version shown above
Internal View

Pictures of the NEW Road Mitts
Internal View
Internal View
Internal View

Internal View
Internal View
Internal View

Internal View