Refine By

Brands

+ more brands

Consumer Reviews

Availability

Size

+ more sizes
VisaMasterCardDiscoverPayPal
 
> Bicycling Catalog > Accessories > Tools/Maintenance

Tools/Maintenance

332 Results
Per Page 30 60
Problem Solvers Through-Axle Hub Adapters for Truing Stands
$39.95

The Problem Solvers Through-Axle adapters make it possible to easily fit front and rear wheels with through axles into truing stands for wheel truing and repair. These adapters fit into the common through-axle sizes and have o-rings so that they fit nicely and stay put as you work on the wheel and… [more]

Jagwire Needle Driver
$39.99

Jagwire's Needle Driver is a simple-to-use tool that secures the end of a hydraulic hose and allows for easy and gentle installation of hose fittings. The result is ideal brake performance and simple set up. [more]

Lezyne Chain Drive (11-Speed)
$39.99

Lezyne's Chain Drive (11-Speed) chain tool is constructed from chromoly for strength and reliability. Its ergonomic shape gives you a comfortable surface to grip while removing 11-speed chain pins. There is also an integrated guide pin removal tool. Plus, it boasts 2 Mavic and 2 standard square… [more]

Lezyne CRV 20
$39.99

Lezyne's CRV 20 compact multi-tool has what you need for road and trailside repairs. It boasts a myriad of tools including: 2, 2.5, 3, 4, 5, 6, and 8mm Allen wrenches plus flat-head and Phillips screwdrivers. There's also a chain tool, a T25 Torx bit, a disc-brake-pad separator, an 8mm open-end… [more]

Park Tool Chain Gang Chain Cleaning System
$39.99

Dirty drivetrains shift poorly and wear out prematurely. Park's Chain Gang contains everything needed to quickly and easily clean chains, freewheel cogs, and chainrings. The system includes Park's Cyclone Chain Scrubber, GearClean Brush, and an 8-ounce bottle of CB-2 Citrus ChainBrite. The Chain… [more]

Topeak PrepStand Magnetic Tool Tray
$39.99

Topeak's PrepStand Magnetic Tool Tray is a sturdy plastic tray with a magnetic metal bottom to keep steel tools and small parts close at hand for maximum convenience. It has a folding handle for portability and that also allows it to fit in Topeak's PrepStation (sold separately). [more]

Park Tool Bottom Bracket Bearing Tool Set
$41.49

Park's Bottom Bracket Bearing Tool Set removes and installs (with a bearing press, which is sold separately) BB30, PF30, EVO 386 and BBright bottom bracket bearings. This fine tool slides through the bottom bracket shell and into the bearings so the bearings can be tapped out with a hammer. Two… [more]

Park Tool Socket And Bit Set
$41.95

Park Tool's SBS-1 Socket And Bit Set is a shop quality set of sockets, hex bits and Torx bits for the bike mechanic. Ideal for use with Park Tool Torque Wrenches, the SBS-1's 3/8-inch drive bits and sockets are made from tough chrome vanadium steel for long life. The set includes 3, 4, 5, 6, 8 and… [more]

Park Tool Threadless Star Nut Setter With Guide
$41.95

Park's Threadless Star Nut Setter makes it quick and easy to install star-fangled nuts used with 1-inch and 1-1/8-inch threadless headset systems. Using a durable steel driver and built-in guide, the TNS-4 perfectly aligns the star-fangled nut and sets it to the proper depth every time. Plus, the… [more]

Park Tool Oversize Adjustable Saw Guide
$42.95

Park's Oversize Adjustable Saw Guide guides a hacksaw so that you can accurately cut fork steerers, airfoil-shaped seatposts and more. The guide is made to be held in a vise and it has hardened-steel cutting slots and a secure clamp for the part you're cutting so that you make a perfect cut every… [more]

Park Tool Threadless-Fork Saw Guide for Carbon Composite Forks
$43.99

Park's Threadless-Fork Saw Guide ensures a straight, accurate cut on threadless carbon forks. Specially designed to accommodate wider, carbon specific saw blades, the SG-8 ensures a perfect cut every time. Slide on the guide, clamp it down and the specially shaped hardened-steel cutting slot guides… [more]

Park Tool Torque Wrench (60 inch-pound max.)
$44.95

Park's Torque Wrench is the best way to get every nut and bolt on your bike tight enough, yet not too tight. This precision tool measures up to 60 inch pounds (a metric scale is also included) and has a 1/4-inch drive with an adapter, which accepts 3/8-inch-drive sockets. [more]

Topeak FlashStand
$44.99
Product Rating
 
2.0 stars
 (1 Review)

Topeak's FlashStand is a super work/display stand that folds up to become extremely portable as well! This affordable two-footed wonder supports your bike at the bottom bracket and down tube and raises the rear wheel with two adjustable-height feet. Take it along in the trunk of your car to dial-in… [more]

Topeak PrepStand Tool Tray w/Lid
$44.99

Topeak's PrepStand Tool Tray attaches to their PrepStand repair stand (sold separately) to keep tools and small parts close at hand and has divided compartments for maximum convenience. It's made of durable plastic and it rotates for optimum accessibility. It also has a translucent lid so nothing… [more]

Jagwire Disc Brake Multi Tool
$45.99

Jagwire's Disc Brake Multi Tool includes 4 important and frequently used disc brake tools so you have what you need to keep your brakes working great. You get a pad spacer, bleed block, rotor truer (straightener) and piston press. [more]

Lezyne SV10
$45.99

Lezyne's compact SV10 folding tool has what you need for most road and trailside repairs. Its aluminum body holds ten tools including: 2, 3, 4, 5, 6 and 8mm Allen wrenches, a Phillips screwdriver, a chain tool, plus T25 and T30 Torx bits. And, it only weighs 101 grams. [more]

Problem Solvers Holy Driver
$46.65

The Problem Solvers Holy Driver is a durable chromoly tool used for holding and turning spoke nipples when building wheels and fixing them. You can use it manually, spinning it in your fingers to quickly fasten nipples. And, you can use it in a power drill for even faster wheel work. The tool tip… [more]

Park Tool Press Fit Bottom Bracket Bearing Tool Set
$46.95

Park Tool's Bottom Bracket Bearing Tool Set removes and installs (with a bearing press which is sold separately) BB86, BB90, BB92 and Press Fit bottom brackets from Shimano, Race Face, SRAM and others that use a nominal 24mm-diameter spindle. This tool has a bearing remover that fits inside the… [more]

Park Tool Cable Stretcher
$48.95

Commonly referred to as a 4th Hand, Park's Cable Stretcher pulls cables tight. Its one-hand operation and thumblock holds the cable so you can easily maintain cable tension while tightening cable fixing bolts and nuts. Made from chrome-plated and heat-treated steel and featuring cushion grips for… [more]

Park Tool Freewheel Remover Wrench
$49.95

Park's Freewheel Remover Wrench provides superior leverage for freewheel removal and installation. Its head slides over Park freewheel removers and features a locking knob for a secure fit. [more]

Topeak Alien II
$49.95
Product Rating
 
5.0 stars
 (1 Review)

When a mechanical problem has you feeling lost in space, the Alien II is the extraterrestrial that will ensure you don't have to phone home. Its molded-plastic body provides an excellent gripping surface and splits in two with a press of a button. Tools include: 2, 2.5, 3, 4, 5, 6, 8 and 10mm Allen… [more]

Topeak Urban 8 Multi-Tool
$49.95

Topeak's Urban 8 Multi-Tool is designed for urban/one-speed bikes with wheels that are held on with axle nuts. It's made to attach to the bottle-cage mounts on the frame with the included tool-free bolts (so that it's easy to remove for use). This fine tool is constructed of high-strength stainless… [more]

Jagwire Pro Hydraulic Brake Line Cutter
$49.99

Jagwire's Pro Hydraulic Brake Line Cutter is a shop-quality tool that makes it quick and easy to precisely and cleanly cut hydraulic brake lines. With this fine hand-held tool you can cut brake lines on the workbench and on your bike, too. [more]

Park Tool Digital Caliper
$49.99

What's your seatpost size again? Park's Digital Caliper accurately measures seatposts, head tubes, bearings, spoke diameters, etc. It's a precision instrument built accurate to 0.01mm with a stainless-steel mechanisms and a rugged composite body. The tool’s ability to measure in metric, decimal… [more]

Park Tool P-Handled Torx Wrench Set
$52.95

Park's Torx Wrench Set includes T-handled T6, T8, T10, T15, T20, T25, T30 and T40 Torx wrenches with offset handles made from durable nylon in a comfortable, ergonomic design. The wrenches are made of high-torque industrial steel for exceptional durability. Plus, this set of super tools comes with… [more]

Park Tool Torque Wrench (600 inch-pound max.)
$52.95

Park's Torque Wrench is the best way to get every nut and bolt on your bike tight enough, yet not too tight. This heavy-duty wrench provides excellent leverage and features a 3/8-inch drive capable of accurately measuring up to 600 inch pounds (a metric scale is included, too). [more]

Park Tool Wheel Alignment Gauge
$54.95

For wheels to perform properly, it's important that the rims be centered over the hubs. To check this, and to make precision adjustments, Park's Wheel Alignment Gauge (also called a dishing tool) is a must. It allows you to easily check centering on road, mountain and BMX wheels from 16 to 29… [more]

Park Tool Truing Stand Upright Extension
$55.95

Park's Truing Stand Upright Extensions are made of durable chrome-plated steel and have quick-releases so they install in seconds to your Park TS-2 Professional Truing Stand (sold separately). The Uprights allow the stand to be used with wheels with hubs up to 160mm wide (found on some tandems and… [more]

Park Tool Tool Roll
$59.49

With Park's Tool Roll you'll be able to easily fix minor mechanicals on the road and trail. It includes Park's I-Beam Mini-Tool with 3, 4, 5, and 6mm Allen wrenches, a socket 8mm Allen and regular screwdriver. You also get Park's Pocket Protector Micro Pump that fits all valves and sports a… [more]

Park Tool Internal Seat Tube Clamp
$59.99

Clamping directly to certain frames can cause inadvertent damage to the frame or paint finish. You need Park's Internal Seat Tube Clamp! It securely holds most bikes without clamping on any frame tube. The hex-shaped shaft resists twisting while clamped in the repair stand and it works with a huge… [more]

332 Results
Per Page 30 60