Searching...
Plymouth, MI
734.420.1200
sales, service, rentals, and all around bike geekiness.
 
 
 
 
 
 
 

Refine By

Brands

+ more brands

Consumer Reviews

Availability

Size

+ more sizes
VisaMasterCardDiscoverPayPal
 
> Bicycling Catalog > Accessories > Tools/Maintenance

Tools/Maintenance

542 Results
Per Page 30 60
<< Prev 6 7 8 9 10 Next
Lezyne SV10
$45.99

Lezyne's compact SV10 folding tool has what you need for most road and trailside repairs. Its aluminum body holds ten tools including: 2, 3, 4, 5, 6 and 8mm Allen wrenches, a Phillips screwdriver, a chain tool, plus T25 and T30 Torx bits. And, it only weighs 101 grams. [more]

Problem Solvers Holy Driver
$46.65

The Problem Solvers Holy Driver is a durable chromoly tool used for holding and turning spoke nipples when building wheels and fixing them. You can use it manually, spinning it in your fingers to quickly fasten nipples. And, you can use it in a power drill for even faster wheel work. The tool tip… [more]

Park Tool Press Fit Bottom Bracket Bearing Tool Set
$46.95

Park Tool's Bottom Bracket Bearing Tool Set removes and installs (with a bearing press which is sold separately) BB86, BB90, BB92 and Press Fit bottom brackets from Shimano, Race Face, SRAM and others that use a nominal 24mm-diameter spindle. This tool has a bearing remover that fits inside the… [more]

Lezyne SV11
$46.99

Lezyne's compact SV11 folding tool has what you need for most road and trailside repairs. Its aluminum body holds ten tools including: 2, 2.5, 3, 4, 5, 6, and 8mm Allen wrenches, a flat head screwdriver, a chain tool, plus T25 and T30 Torx bits. [more]

Park Tool Cable Stretcher
$48.95

Commonly referred to as a 4th Hand, Park's Cable Stretcher pulls cables tight. Its one-hand operation and thumblock holds the cable so you can easily maintain cable tension while tightening cable fixing bolts and nuts. Made from chrome-plated and heat-treated steel and featuring cushion grips for… [more]

Park Tool Frame Alignment Gauge
$49.95

Many bicycles will not shift or track properly because the front and rear wheels are not in line with the frame. If these conditions still exist after wheel and derailleur adjustments, the seat stays, chain stays, and rear drop outs of the frame may be misaligned. For years the accepted method to… [more]

Park Tool Freewheel Remover Wrench
$49.95

Park's Freewheel Remover Wrench provides superior leverage for freewheel removal and installation. Its head slides over Park freewheel removers and features a locking knob for a secure fit. [more]

Park Tool Pedal Tap (9/16" x 20 tpi)
$49.95

Clean out or restore damaged threads in crank arms with Park Tool's Pedal Taps. They're sold as a set of right and left hand threads. Made of high carbon steel, precision ground, and hardened to stay sharp, they cut easily and fit all conventional tap handles. • Includes a set of 2 taps, 9/16" x 20… [more]

Topeak Alien II
$49.95
Product Rating
 
5.0 stars
 (1 Review)

When a mechanical problem has you feeling lost in space, the Alien II is the extraterrestrial that will ensure you don't have to phone home. Its molded-plastic body provides an excellent gripping surface and splits in two with a press of a button. Tools include: 2, 2.5, 3, 4, 5, 6, 8 and 10mm Allen… [more]

Topeak Urban 8 Multi-Tool
$49.95

Topeak's Urban 8 Multi-Tool is designed for urban/one-speed bikes with wheels that are held on with axle nuts. It's made to attach to the bottle-cage mounts on the frame with the included tool-free bolts (so that it's easy to remove for use). This fine tool is constructed of high-strength stainless… [more]

Finish Line Pro Care Bucket Kit 6.0
$49.99

To keep your bike running like the day you got it, pick up Finish Line's Pro Care Bucket Kit 6.0. It gives you what you need to clean and lube your bike to perfection: Wet lube, Dry lube, Bike Wash cleaning solution, Finish Line's Grunge Brush as well as their Multi Degreaser. And, the kit even… [more]

Jagwire Pro Hydraulic Brake Line Cutter
$49.99

Jagwire's Pro Hydraulic Brake Line Cutter is a shop-quality tool that makes it quick and easy to precisely and cleanly cut hydraulic brake lines. With this fine hand-held tool you can cut brake lines on the workbench and on your bike, too. [more]

Lezyne Stainless 20
$49.99

Lezyne's Stainless 20 folding tool contains everything you need and more for road and trailside repairs. Its sturdy stainless-steel body holds 20 tools including: 2, 2.5, 3, 4, 5, 6 and 8mm Allen wrenches, flat head and Phillips screwdrivers, a chain tool, a T25 Torx bit, and three spoke wrenches.… [more]

Park Tool Digital Caliper
$49.99

What's your seatpost size again? Park's Digital Caliper accurately measures seatposts, head tubes, bearings, spoke diameters, etc. It's a precision instrument built accurate to 0.01mm with a stainless-steel mechanisms and a rugged composite body. The tool’s ability to measure in metric, decimal… [more]

Park Tool Tool Kaddy
$49.99

Park's handy Tool Kaddy keeps your frequently used tools right at your fingertips. It rotates so you can get to your tools and sports multiple deep pockets and 12 hooks. It mounts easily with the included mounting hardware on Park's PRS-2, PRS-3, PRS-4, PRS-11, PRS-12 and PRS-13 repair stands (sold… [more]

Tacx Gem Bikestand Parking/Display Stand
$49.99

Tacx's Gem Bikestand is a simple-to-use, sturdy and safe bicycle parking and display stand for your road and mountain bikes. Instead of just leaning your valuable bicycles against the wall where they can fall over, use the Gem. It has 2 plastic hooks that hold your bike by the rear stays and a… [more]

White Lightning Epic Ride (1-quart)
$49.99

White Lightning's Epic Ride lets you take on that all day ride and hear only the birds chirping, not your chain squealing. Its unique formula features premium non-petroleum synthetics that provide unheard of durability without the grimey build-up common with synthetic oils. This versatile lube also… [more]

Avid Disc Brake Bleed Kit
$51.00

Periodic brake bleeds are necessary to maintain consistent stopping performance, and Avid's Disc Brake Bleed Kit has everything you need to keep your Avid Juicy, Code or Elixir hydraulic discs running strong. [more]

Park Tool P-Handled Torx Wrench Set
$52.95

Park's Torx Wrench Set includes T-handled T6, T8, T10, T15, T20, T25, T30 and T40 Torx wrenches with offset handles made from durable nylon in a comfortable, ergonomic design. The wrenches are made of high-torque industrial steel for exceptional durability. Plus, this set of super tools comes with… [more]

Park Tool Torque Wrench (600 inch-pound max.)
$52.95

Park's Torque Wrench is the best way to get every nut and bolt on your bike tight enough, yet not too tight. This heavy-duty wrench provides excellent leverage and features a 3/8-inch drive capable of accurately measuring up to 600 inch pounds (a metric scale is included, too). [more]

Park Tool Chain Whip Pliers
$53.95

• Secure engagement, easy to use, and fast! • The CP-1 quickly grips cogs from 9 to 24 teeth with no manual adjustments • A great shop tool, the CP-1 is 13.7" (35cm) long and can be used with one hand to hold cassettes solidly during lock ring removal • Forged steel construction with a spring… [more]

Park Tool Rivet Peening Tool for Campagnolo 11-speed chain
$53.95

After pressing the special connecting rivet into a Campagnolo 11-Speed Chain and breaking off the pilot, Campagnolo requires the end of the connecting rivet to be "peened" or "deformed" to prevent chain failure. The precision-machined CT-11 is used to accurately perform this critical process. Note:… [more]

Park Tool Wheel Alignment Gauge
$54.95

For wheels to perform properly, it's important that the rims be centered over the hubs. To check this, and to make precision adjustments, Park's Wheel Alignment Gauge (also called a dishing tool) is a must. It allows you to easily check centering on road, mountain and BMX wheels from 16 to 29… [more]

Crank Brothers Pica Premium Tool
$54.99

Crank Brothers' Pica Premium Tool is so nice you might want to save it for your workshop. Where it really shines, though, is out on the trail. It's constructed from 6061-aluminum and investment-cast stainless steel for repair-after-repair durability and stunning good looks. Plus, this sweet… [more]

RockShox Vise Blocks
$55.00

• Essential mechanic tools to properly service and maintain all RockShox products • Clamps the shock body for easy maintence [more]

Park Tool Truing Stand Upright Extension
$55.95

Park's Truing Stand Upright Extensions are made of durable chrome-plated steel and have quick-releases so they install in seconds to your Park TS-2 Professional Truing Stand (sold separately). The Uprights allow the stand to be used with wheels with hubs up to 160mm wide (found on some tandems and… [more]

Park Tool Tool Roll
$59.49

With Park's Tool Roll you'll be able to easily fix minor mechanicals on the road and trail. It includes Park's I-Beam Mini-Tool with 3, 4, 5, and 6mm Allen wrenches, a socket 8mm Allen and regular screwdriver. You also get Park's Pocket Protector Micro Pump that fits all valves and sports a… [more]

Park Tool Internal Cable Routing Kit
$59.95

Take the guesswork out of installing cables, wires, and housing inside the frame. The IR-1 speeds the internal frame routing of electric wires, shift cable/housing, brake cable/housing, and hydraulic tubing on carbon fiber, Ti, and aluminum frames. The Internal Cable Routing Kit includes three… [more]

Park Tool Internal Seat Tube Clamp
$59.99

Clamping directly to certain frames can cause inadvertent damage to the frame or paint finish. You need Park's Internal Seat Tube Clamp! It securely holds most bikes without clamping on any frame tube. The hex-shaped shaft resists twisting while clamped in the repair stand and it works with a huge… [more]

Park Tool Thru Axle Adaptors
$60.95

Park Tool's Thru Axle Adaptors make it possible to adapt all Park Tool Truing Stands to work with 12mm, 15mm, 20mm, and 25mm thru axle front wheels, as well as Cannondale Lefty wheels (each sold separately). The TS-TA also work with the rear 135mm thru axle hubs in the TS-2.2 and TS-3. The TS-TA… [more]

Park Tool Tire Seating Tool
$61.99

Park's Tire Seating Tool is designed to quickly seat the bead on stubborn tires. During inflation some tire beads can slip below the rim edge and become difficult to pull out and align. The PTS-1 comes to the rescue with its non-slip jaws and vinyl-coated handles that provide plenty of leverage for… [more]

Park Tool Campagnolo Power Torque Crank and Bearing Adaptor Set
$62.95

The CBP-5 is used in conjunction with the CBP-3 set to remove and install Power Torque crank arms and right side crank bearings. The CBP-5 includes: • Crank and crank bearing removal adaptor to be used with the CBP-3 Bearing Puller • Power Torque bearing setter • Removal pads for use with carbon… [more]

Park Tool Sliding Through-Axle Adapter
$62.99

Park's Sliding Through-Axle Adapter converts their PRS-20, PRS-21 and PRS-23 repair stand (sold separately) to accept 15mm and 20mm through-axle wheeled bikes. Use your axle to mount your bike. One side of the adapter is for 15mm axles, the other for 20mm. [more]

Park Tool P-Handled Hex Wrench Set
$64.95

Park's Hex Wrench Set includes P-handled 2, 2.5, 3, 4, 5, 6, 8 and 10mm Allen wrenches with offset handles made from durable nylon in a comfortable, ergonomic design. The wrenches are made of chrome vanadium for exceptional durability. The long shafts feature Bondhus heads for accessing… [more]

Crank Brothers Pica+ Premium Tool
$64.99

Crank Brothers' Pica+ Premium Tool is so nice you might want to save it for your workshop. Where it really shines, though, is out on the trail. It's constructed from 6061-aluminum and investment-cast stainless steel for repair-after-repair durability and stunning good looks. Plus, this sweet… [more]

Topeak LineUp Stand
$64.99

Topeak's LineUp Stand securely holds your bike by the rear wheel for storage or display. Its spring-loaded arm automatically adjusts to fit wheels from 20-inches to 29-inches in diameter. Use it at home to store your bike, or use it to hold your pit bike at your next cross race! [more]

Park Tool Campagnolo Bearing Puller and Installation Set
$65.95

Park's Campagnolo Bearing Puller and Installation Set is designed and built to install and remove the pressed bearing used on Campagnolo and Fulcrum Ultra-Torque cranks. The bearing puller’s forged arms and tapered edges securely pinch under the bearing while the heavy-duty plunger system “pulls”… [more]

Park Tool Master Chain Tool
$66.95
Product Rating
 
3.5 stars
 (2 Reviews)

Park's Master Chain Tool is designed specifically to work with the tight tolerances and narrow profiles of 10, and 11-speed chains and most high-quality derailleur chains. It uses an integrated link pocket to ensure precise alignment and also features perfectly contoured, cushioned handles for… [more]

Park Tool Master Chain Tool
$66.95
Product Rating
 
3.5 stars
 (2 Reviews)

Park's Master Chain Tool is designed specifically to work with the tight tolerances and narrow profiles of 10- and 11-speed chains and all high-quality derailleur chains. It's made of tool steel for excellent durability and uses an integrated link pocket to ensure precise alignment. It also… [more]

Jagwire Pro DOT Bleed Kit
$67.99

Jagwire's Pro DOT Bleed Kit comes with the right fittings to bleed Avid, Formula, Hayes and Hope hydraulic-disc brakes for optimum braking performance. You can buy it with or without Finish Line DOT brake fluid. [more]

Jagwire Pro Mineral Oil Bleed Kit
$67.99

Jagwire's Pro Mineral Oil Bleed Kit has everything you need to bleed Giant, Magura, Shimano and Tektro brakes plus a bottle of Finish Line mineral oil, too (image of Finish Line mineral oil unavailable from manufacturer). [more]

Avid Professional Disc Brake Bleed Kit
$68.00

Periodic brake bleeds are necessary to maintain consistent stopping performance, and Avid's Professional Disc Brake Bleed Kit has everything you need to keep your Avid Juicy, Code or Elixir hydraulic discs running strong. And, this pro version is designed to stand up to heavy use with high-volume… [more]

Park Tool Cast Aluminum Tool Tray
$68.95

Park's Cast Aluminum Tool Tray attaches easily to most of Park's repair stands (sold separately) to keep your tools, lubes and small parts close at hand. It has deep sides so your small items stay put, a holder for cans of lube and slots for holding your tools. This handy tool fits Park's PRS-2,… [more]

Park Tool Centering Gauge
$69.95

Park Tool's Centering Gauge represents a dished rear wheel to assist in centering the TS-2.2 or TS-2 truing stands (each sold separately). [more]

Finish Line Citrus Degreaser (1-Gallon Jug)
$69.99

Finish Line's Citrus Degreaser was cycling's original orange peel-based degreaser and it has set the standard in bike parts cleaning since 1988. Super strong and fast-working to cut through grime and crud, it's formulated with powerful and natural citrus extracts. With Citrus your drivetrain will… [more]

Finish Line Multi Degreaser (1-Gallon Jug)
$69.99

Finish Line's Multi Degreaser packs strong and safe cleaning power. It's 100% biodegradable, non-toxic, free of irritating fumes and won't harm you or the environment. It cleans dirt, grease and grime and leaves little residue. It's also non flammable and is safe for all surfaces/materials. [more]

Finish Line Pro Care Bucket Kit 8.0
$69.99

Want your bike to look and run like a pro's ride? Pick up Finish Line's Pro Care Bucket Kit 8.0. It comes with everything you need to keep your steed cleaned and lubed: Wet lube, Dry lube, Bike Wash cleaning solution, Finish Line's Grunge and Scrub Brushes as well as their Multi and Speed… [more]

Park Tool Derailleur Hanger Alignment Gauge
$74.95

An updated version of the popular DAG-1, Park Tool's DAG-2 utilizes a longer measuring pointer, longer threaded stud, and a longer, narrower alignment boss to fit a wider variety of bikes. The Derailleur Hanger Alignment Gauge can help solve a multitude of derailleur shifting problems, most notably… [more]

Park Tool Home Mechanic Bearing Cup Press
$79.95

Simple and economical, Park's Home Mechanic Bearing Cup Press is the perfect addition to your toolbox. With a few quick twists it easily installs all sizes of headset cups and one-piece bottom bracket cups. [more]

Park Tool Shop Cone Wrench Set
$79.95

Park Shop Cone Wrenches are made of thin tool steel to fit the low-clearance adjusting nuts and cone flats on hubs and other bearing assemblies. Their special Y-heads put more material where it's needed for greater strength. Most applications require several cone wrenches, so Park gives you a whole… [more]

Park Tool Spoke Tension Meter
$79.95

The key to wheels that are strong and reliable is having spokes that are properly and uniformly tensioned. Park's Spoke Tension Meter accurately and reliably measures the absolute tension of each of the spokes in a wheel, as well as the relative tension between all the spokes in a wheel. It's easy… [more]

Feedback Sports Truing Station
$79.99

Feedback Sports' Truing Station works great on its own and can be attached to the company's repair stands to create a great all-in-one work station for home and travel (Feedback repair stands sold separately). This quality stand lets you true wheels up to 29 inches (with and without tires). Its… [more]

Park Tool Metric Wrench Set
$79.99

Never be left looking for an errant wrench when you have Park's Metric Wrench Set. It includes 12 high quality Park metric wrenches from 6 to 17mm in diameter, featuring both box and open ends. They are all forged from chrome vanadium steel, then chrome plated for durability and dipped in Park Tool… [more]

Park Tool Crown Race Setting System (1.25, 1.5-inch)
$83.49

Quickly, safely and easily set your crown race on 1.5-inch steerer tubes with Park's CRS-15 Crown Race Setting System. Specifically engineered for oversized steerers, the CRS-15 comes with one setting tube and a 1.5-inch inset that ensures full contact with the crown race for precision installation. [more]

Park Tool Crown Race Setting System (1, 1-1/8 -inch)
$84.95

Quickly, safely and easily set your crown race with Park's CRS-1 Crown Race Setting System. It includes 6 different inserts (3 for 1-inch and 3 for 1-1/8-inch steerer tubes) that ensure full contact with the crown race for precision installation. [more]

RockShox RS1 Anchor Fitting Tool
$86.00

• Use to remove air shaft and damper shaft • Reverse threaded • See RS1 Service Manual for instruction [more]

Park Tool Snap Ring Pliers Set
$86.95

Designed and built with the specific needs of the bike mechanic in mind, the RP-SET features three forged pliers made for internal snap rings and one for external snap rings. Includes: • RP-1: .9mm straight internal. Opens from 22mm down to 0 (tips touching) • RP-2: 1.3mm bent internal. Opens from… [more]

SRAM Hydraulic Hose Cutter, Bench-mount
$89.00

SRAM's Hydraulic Hose Cutter is a bench-mount cutter for easily, quickly and precisely cutting and sizing your non-braided hydraulic lines. You even get spare blades! [more]

Jagwire Pad Press Plus
$89.99

Jagwire's Pad Press Plus is a handy tool that makes removing and installing cartridge brake pads quick and precise. The holder and lever action makes it easy to hold the brake shoes while you push out the pad inserts and press in the replacements. And you can bolt this fine tool to a workbench with… [more]

Park Tool Plier-Type Chain Tool
$89.99

Park's Plier-Type Chain Tool is designed for fast, easy removal and repair of chains. Its plier design generates a tremendous amount of leverage to remove even the toughest rivets. Plus, the CT-2 has a travel adjust feature that lets you set the throw of the pliers to return the rivet back the… [more]

542 Results
Per Page 30 60
<< Prev 6 7 8 9 10 Next